[TriEmbed] Article: Elektor Magazine: Infineon for Makers Means Arduino Shields 4U

[Scott Hall]

I have no idea what their lead time is.  However, my last order was
fulfilled from their NYC warehouse and took less than a week -- but it has
been inconsistent.

On Fri, Oct 18, 2019 at 12:04 PM Pete Soper via TriEmbed <
triembed at triembed.org> wrote:

> Holy guacamole, the Euro is under 90 cents. I guess I've been under a rock
> (only pay attention to the UK pound). The last time I noticed the Euro this
> low was in Germany about 15 years ago. So the Infineon temp sensor board is
> roughly $8.90, about two dollars less than what Digikey wants for the chip
> on that board. Shipping is with a "standard rate" of around $4.45. What's
> the lead time of their standard shipping, Scott?
>
> -Pete
>
> On 10/18/19 11:27 AM, Scott Hall via TriEmbed wrote:
>
> *Infineon for Makers Means Arduino Shields 4U
> <https://www.elektormagazine.com/news/infineon-for-makers?utm_source=Elektor+International+%28English%29>*
> *Infineon for Makers means Arduino-compatible shields and shields2go to
> evaluate BLDC motor drivers, LED drivers, XMC microcontrollers MCUs, and
> much more.*
>
> <http://goog_980625353>
>
> https://www.elektormagazine.com/news/infineon-for-makers?utm_source=Elektor+International+%28English%29
>
> --
> Scott G. Hall
> Raleigh, NC, USA
> scottghall1 at gmail.com
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
>
> To post message: TriEmbed at triembed.org
> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
> To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe <unsubscribe-TriEmbed at bitser.net?subject=unsubscribe>
>
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
>
> To post message: TriEmbed at triembed.org
> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
> To unsubscribe, click link and send a blank message: mailto:
> unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
>
>

-- 
Scott G. Hall
Raleigh, NC, USA
scottghall1 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20191018/dba3c783/attachment.htm>