[TriEmbed] Article: Elektor Magazine: Infineon for Makers Means Arduino Shields 4U

Pete Soper pete at soper.us
Fri Oct 18 11:38:03 CDT 2019


In the shipping part of their web site they say "most stuff comes out of 
their main warehouse in Netherlands", so I guess if you've had 
alternating shipment sources that would create the inconsistency. The 
warehouse location was in turn surprising, 'cause I was under the 
impression this is a UK company. Maybe getting a head start on prep for 
Brexit. :-)
-Pete

On 10/18/19 12:20 PM, Scott Hall wrote:
> I have no idea what their lead time is.  However, my last order was 
> fulfilled from their NYC warehouse and took less than a week -- but it 
> has been inconsistent.
>
> On Fri, Oct 18, 2019 at 12:04 PM Pete Soper via TriEmbed 
> <triembed at triembed.org <mailto:triembed at triembed.org>> wrote:
>
>     Holy guacamole, the Euro is under 90 cents. I guess I've been
>     under a rock (only pay attention to the UK pound). The last time I
>     noticed the Euro this low was in Germany about 15 years ago. So
>     the Infineon temp sensor board is roughly $8.90, about two dollars
>     less than what Digikey wants for the chip on that board. Shipping
>     is with a "standard rate" of around $4.45. What's the lead time of
>     their standard shipping, Scott?
>
>     -Pete
>
>     On 10/18/19 11:27 AM, Scott Hall via TriEmbed wrote:
>>     /Infineon for Makers Means Arduino Shields 4U
>>     <https://www.elektormagazine.com/news/infineon-for-makers?utm_source=Elektor+International+%28English%29>/
>>     /Infineon for Makers means Arduino-compatible shields and
>>     shields2go to evaluate BLDC motor drivers, LED drivers, XMC
>>     microcontrollers MCUs, and much more./
>>
>>     <http://goog_980625353>
>>     https://www.elektormagazine.com/news/infineon-for-makers?utm_source=Elektor+International+%28English%29
>>
>>     -- 
>>     Scott G. Hall
>>     Raleigh, NC, USA
>>     scottghall1 at gmail.com <mailto:scottghall1 at gmail.com>
>>
>>     _______________________________________________
>>     Triangle, NC Embedded Computing mailing list
>>
>>     To post message:TriEmbed at triembed.org  <mailto:TriEmbed at triembed.org>
>>     List info:http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
>>     TriEmbed web site:http://TriEmbed.org
>>     To unsubscribe, click link and send a blank message:mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
>>
>
>     _______________________________________________
>     Triangle, NC Embedded Computing mailing list
>
>     To post message: TriEmbed at triembed.org <mailto:TriEmbed at triembed.org>
>     List info:
>     http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
>     TriEmbed web site: http://TriEmbed.org
>     To unsubscribe, click link and send a blank message:
>     mailto:unsubscribe-TriEmbed at bitser.net
>     <mailto:unsubscribe-TriEmbed at bitser.net>?subject=unsubscribe
>
>
>
> -- 
> Scott G. Hall
> Raleigh, NC, USA
> scottghall1 at gmail.com <mailto:scottghall1 at gmail.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20191018/4ac5d3e8/attachment.htm>


More information about the TriEmbed mailing list