[TriEmbed] PowerFet SOIC8

[Robert Gasiorowski]

Pete, you have exposed copper with 2 signals under IC.
If the IC you use has a heat pad, you may have problems.

On Fri, Jun 26, 2015 at 11:37 AM, Shane Trent via TriEmbed <
triembed at triembed.org> wrote:

> Pete,
>
> Nice! Put me down for a couple of your boards. I look forward to taking
> the design for a spin!
>
> Shane
>
> On Fri, Jun 26, 2015 at 11:32 AM, Pete Soper via TriEmbed <
> triembed at triembed.org> wrote:
>
>>  I put the pull-down resistor and a handful of vias into the board as
>> Shane recommended. The vias are tricky, as you have to name them with the
>> same net name as the name of the copper flow polygons, but then if you do a
>> "rip up" they get optimized out.
>>
>> I'm going to order some of these today. If OSH Park has not slowed down I
>> should have them in hand a few days before the next meeting.
>>
>>    schematic
>> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1-sch.pdf>
>>    board
>> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1-brd.png>
>>    Eagle sch file
>> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1.sch>
>>    Eagle brd file
>> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1.brd>
>>
>> -Pete
>>
>>
>> _______________________________________________
>> Triangle, NC Embedded Computing mailing list
>> TriEmbed at triembed.org
>> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
>> TriEmbed web site: http://TriEmbed.org
>>
>>
>
>
> --
> A blog about some of my projects.  http://fettricks.blogspot.com/
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
> TriEmbed at triembed.org
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150626/1b06aa5f/attachment.htm>