[TriEmbed] PowerFet SOIC8

[Shane Trent]

Pete,

Nice! Put me down for a couple of your boards. I look forward to taking the
design for a spin!

Shane

On Fri, Jun 26, 2015 at 11:32 AM, Pete Soper via TriEmbed <
triembed at triembed.org> wrote:

>  I put the pull-down resistor and a handful of vias into the board as
> Shane recommended. The vias are tricky, as you have to name them with the
> same net name as the name of the copper flow polygons, but then if you do a
> "rip up" they get optimized out.
>
> I'm going to order some of these today. If OSH Park has not slowed down I
> should have them in hand a few days before the next meeting.
>
>    schematic
> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1-sch.pdf>
>    board <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1-brd.png>
>    Eagle sch file
> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1.sch>
>    Eagle brd file
> <http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1.brd>
>
> -Pete
>
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
> TriEmbed at triembed.org
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
>
>


-- 
A blog about some of my projects.  http://fettricks.blogspot.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150626/d2e427f1/attachment.htm>