[TriEmbed] Stepper Motor Controller

[Grawburg]

1. The small controller I use is  a ULN2003 board with a 28BYJ-48 motor.
2. The "new" motors are Haydon Series 3500, 0.57A
3. The board that is attached to the printer is a Xylotex XS-3525/8S-4. It is way more than I need -- or understand how to use.

Brian




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150210/93666e99/attachment.htm>