[TriEmbed] Wireless Camera for 3D Printer

[Dishit Parekh]

Thank you everyone for the suggestions! I will talk to my advisor about it
and see which one works out the best for our lab! :)

On Sun, Apr 5, 2015 at 2:44 AM, Tanner Lovelace <clubjuggler at gmail.com>
wrote:

> Use the OctoPi distribution on a Raspberry Pi and the Raspberry Pi
> camera.  Streaming and time lapse are built directly into the distribution.
> It really is almost no setup (you have to enable the raspberry pi camera).
> I've run it on my home setup (Printerbot Simple Metal with Raspberry Pi
> running OctoPi) very successfully.
>
> Cheers,
> Tanner Lovelace
>
> On Fri, Apr 3, 2015 at 10:37 AM, Dishit Parekh <dpparekh at ncsu.edu> wrote:
>
>> Hi all,
>>
>> I am using a CubePro Trio 3d Printer from 3D Systems in my lab at NC
>> state and wish to control it wirelessly from an outdoor location (home,
>> office, etc.). I am planning to use the OctoPrint <http://octoprint.org>
>> software for the controlling part with a Raspberry Pi. Can you suggest me
>> some good cameras to monitor the activity of my 3d printer for the same.
>> Thank you! :)
>>
>> --
>> Thanks and Regards,
>> Dishit Parekh
>> *PhD Student - 2nd Year,*
>> *External VP, **CBE GSA*
>>
>> *Department of Chemical and Biomolecular Engineering (CBE),North Carolina
>> State University, USA.*
>> *Phone (M):* (919) 888-8274, *E-mail:* dpparekh at ncsu.edu *
>> <http://www.linkedin.com/pub/dishit-parekh/22/819/5a0/>*
>>
>> _______________________________________________
>> Triangle, NC Embedded Computing mailing list
>> TriEmbed at triembed.org
>> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
>> TriEmbed web site: http://TriEmbed.org
>>
>>
>
>
> --
> Tanner Lovelace
> http://wtl.wayfarer.org/
> (fieldless) In fess two roundels in pale, a billet fesswise and an
> increscent, all sable.
>



-- 
Thanks and Regards,
Dishit Parekh
*PhD Student - 2nd Year,*
*External VP, **CBE GSA*

*Department of Chemical and Biomolecular Engineering (CBE),North Carolina
State University, USA.*
*Phone (M):* (919) 888-8274, *E-mail:* dpparekh at ncsu.edu *
<http://www.linkedin.com/pub/dishit-parekh/22/819/5a0/>*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150406/96f0515f/attachment.htm>