[TriEmbed] PCBs with 3.5 pin pitch

[Rodney Radford]

If you just want a common bus across all of the terminals, why not just use
a piece of copper PCB, drill out the holes and solder it in place?


On Tue, Dec 10, 2013 at 11:46 AM, Grawburg <grawburg at myglnc.com> wrote:

> I purchased a bunch of screw terminals (2 & 3 position) to mount on a PCB,
> but did not realize they
> were 3.5mm pitch.  I'm getting tired of trying to find some small boards
> that I can attach them to.
> Any suggestions of where to look?  I'm simply going to use 2 or 3 each on
> a strip to make a common
> connection point, i.e. sort of a header strip to distribute 12 VDC so I
> need a common soldering strip.
>
>
> Thanks,
> Brian Grawburg
>
>
>
> --
> The truth will set you free . . .but first it will infuriate you.
>
>
>
>
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
> TriEmbed at triembed.org
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20131210/8bf1eeda/attachment.htm>