[TriEmbed] a full custom biz card that runs Linux

[John Wettroth]

I've played with this with standard transparency film and a little 40w Chinese
laser- takes a bit of tuning to get it all correct but works.  Stencils are
really cheap when you order a board if you remember.

Regards,
John M. Wettroth
E: jwet at mindspring.com
M: (919) 349-9875 
H:  (984) 329-5420

-----Original Message-----
From: TriEmbed <triembed-bounces at triembed.org> On Behalf Of Pete soper via
TriEmbed
Sent: Saturday, June 3, 2023 1:51 PM
To: Triangle Embedded Interest Group <triembed at triembed.org>
Subject: [TriEmbed] a full custom biz card that runs Linux

He made his solder stencil with a laser cutter and the BOM runs around $3.

https://www.thirtythreeforty.net/posts/2019/12/my-business-card-runs-linux/


_______________________________________________
Triangle, NC Embedded Interest Group mailing list

To post message: TriEmbed at triembed.org
List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
TriEmbed web site: https://TriEmbed.org
To unsubscribe, click link and send a blank message:
mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
Searchable email archive available at
https://www.mail-archive.com/triembed@triembed.org/