[TriEmbed] Custom JST cables?

[John Vaughters]

Connect-It Inc, 4805 Green Rd #104, Raleigh, NC 27616


I believe they can pretty much make any cable you need. I have used them in the past for many years for one off cables. 

Thanks,

John Vaughters






On Tuesday, July 4, 2023 at 11:45:55 PM EDT, Scott Hall via TriEmbed <triembed at triembed.org> wrote: 





Rick, I'll ask around at work and find out where we get our one-offs done (test setups, prototypes and the like).  I suspect that our main lab guy builds ours, but I can find out what he recommends.  Personally I'm with Trampas and a few others in that I just crimp up my own when needed -- with a small supply of connectors I keep on hand (from DigiKey or someone similar).

- sgh


On Tue, Jul 4, 2023 at 6:25 PM Rick DeNatale via TriEmbed <triembed at triembed.org> wrote:
> I’m trying to clean up a 3D printer after changing the main board. I want new JST cables, with custom lengths, JST-XH to JST-PH for the steppers, and XH to XH for endstops, thermistors, etc.
> 
> My experiences crimping these myself have been mixed.
> 
> Does anyone know where I could get these made ?
> 
> ——
> Rick DeNatale
> _______________________________________________
> Triangle, NC Embedded Interest Group mailing list
> 
> To post message: TriEmbed at triembed.org
> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: https://TriEmbed.org
> To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
> Searchable email archive available at https://www.mail-archive.com/triembed@triembed.org/
> 
> 


-- 
Scott G. Hall
Raleigh, NC, USA
scottghall1 at gmail.com
Although kindness is rarely a job, no matter what you do it's always an option.

_______________________________________________
Triangle, NC Embedded Interest Group mailing list

To post message: TriEmbed at triembed.org
List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
TriEmbed web site: https://TriEmbed.org
To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
Searchable email archive available at https://www.mail-archive.com/triembed@triembed.org/