[TriEmbed] Need liquid flux today (Thur)

[Glen Smith]

We have 3 bottles at the Forge.

On Thu, Mar 5, 2020, 1:43 PM Brian via TriEmbed <triembed at triembed.org>
wrote:

> On 3/5/20 12:22 PM, Rodney Radford via TriEmbed wrote:
> >
> > I checked work and they only have paste, but that is too thick.
> >
>
> The flux paste I've used (ChipQuik) thins out rapidly when heated.  If
> you have a small dish into which you can dispense some flux and heat it
> gently with a heat gun, it may thin out to something more usable.
>
> Alternatively, just use the viscous paste as-is.  Unless it's too
> viscous to successfully dip your wire without bending it, you'll get
> "too much" but all that'll do is make a mess you can clean up with
> alcohol.  I use mine at room temperature; it's in a syringe and I can
> dip the wire straight into the syringe's opening.
>
> HTH,
> -Brian
>
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
>
> To post message: TriEmbed at triembed.org
> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
> To unsubscribe, click link and send a blank message: mailto:
> unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20200305/5e13b110/attachment.htm>