[TriEmbed] Coffee roaster sanity check

[Pete Soper]

So the two amp SSR seems adequate as it's rating is about 15X your load 
current. At the start I was assuming the heater would consume a lot more 
power!

-Pete

On 12/30/19 1:32 PM, Craig Cook via TriEmbed wrote:
>> Did you ever (very carefully) measure the voltage across the motor while the popper was powered?
> Oh, I misread your question.
>
> Fan Motor
>
> 17 Volts DC at the terminals
> 0.018 Amps DC
> Diodes are attached to turn AC into DC
>
>
> Heater
>
> Red (hot) and White (ground) wires
> 113 Volt AC
> 0.134 Amp AC
>
> Black and White wires
> 20 Volt AC
>
>
> Thanks
>
> Craig
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
>
> To post message: TriEmbed at triembed.org
> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
> To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
>