[TriEmbed] M0 interrupts

[Alex Davis]

> 
> The issue is that some interrupts are shared between pins.? If you go look at
> the pinout page for the M0 on Adafruit's site, the image which shows the layout
> and pin information included info on the interrupts:
> https://learn.adafruit.com/adafruit-feather-m0-basic-proto/pinouts? The
> following pins share external interrupts in the zero variant:
> 


I think what’s happening is is that pin 11 is somehow related to I2C, even though https://learn.adafruit.com/adafruit-oled-featherwing/pinouts?view=all <https://learn.adafruit.com/adafruit-oled-featherwing/pinouts?view=all> shows it using other pins for that. I moved INT from the LIS3DH over to A5. We’ll see if THAT works...

|\ |  (¯  \/ |¯\  |V| |\ ¯|¯ |¯) | \/ | | | |¯\ (¯   /¯  /\ |V|
|-||_ (_  /\ |_/ @| | |-| |  | \ | /\ |^| | |_/ (_ . \_  \/ | |







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20171109/e68acb19/attachment.htm>