[TriEmbed] MOSFETs or Relays

Glen Smith mrglenasmith at gmail.com
Thu Jun 26 18:20:00 CDT 2014


Is the 12v supply ground and the pi ground tied together? If not you can
see some wacky results with 2 power supplies floating relative to each
other.

- Thumbed one letter at a time on a 2.25 x 1.25 inch Galaxy smartphone
keyboard, please forgive any errors.
On Jun 26, 2014 5:12 PM, "Grawburg" <grawburg at myglnc.com> wrote:

> Rodney asked for more detail;
>
> Attached is the single n-MOSFET circuit (it's from the project manual I'm
> creating).
> The MCP23017 is an I/O port expander between the devices and the Raspberry
> Pi.
> Each MOSFET connects to a different output port.
> The ground is the ground for the 12VDC, not the Pi.
> I have not checked the output voltage from the chip; I will try putting a
> resistor in-line as suggested.
>
> Brian
>
>
> <https://en.wikipedia.org/wiki/Arthur_Schopenhauer#cite_note-55>
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
> TriEmbed at triembed.org
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20140626/6e18d24b/attachment.html>


More information about the TriEmbed mailing list