[TriEmbed] Power Supply Testing - Am I over or under thinking this?

[Martin Brooke]

​The data sheet Figure 12 says that at 100mA load current you will be
around 90% +-5% efficient​ for Battery 5.5V to 2.6 V  after 2.6V you are on
your own!  For 250mA the efficiency will be a bit  worse particularly at
the lower voltages.

The voltage will stay at 3.3 V very precisely over that range but will have
a small ripple that will not change.

I think it will do what you want if used correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20140624/a10d1389/attachment.htm>