<div dir="ltr"><div>Hi everyone,</div><div><br></div><div>I&#39;ve been looking for a good guide for doing Battery Discharge Testing. The guides I&#39;m finding look like someone copied someone&#39;s homework and added a bunch of words to ensure they met the 10k word requirement. Most seem to be missing a good discussion of the math and testing procedures or spend a lot of time discussing related topics and then glossing over the core subject.<br></div><br><div>As I understand it, I need either a known fixed resistance load or constant current sink within the battery&#39;s discharge rate. I&#39;m testing lithium-ion battery packs that are 40v and have a discharge rate of C/2. As the packs are 2A, 4A and 6A that means 1A/2A/3A discharge rates.<br></div><div> <br></div><div>My current process is to use a 100 ohm load and calculate the discharge time from full charge, 41v, to discharge, 25v. Doing it this way, I know the current across my load will reduce as the battery voltage decreases. Initially that&#39;s 0.411A based on measured resistance of the entire load.</div><div><br></div><div>My Questions:</div><br><ol><li>Is my method sound?</li><li>Should I be using a different method like constant current?</li><li>Is there a way to compensate for the reduction in current in the results other than using a constant current device?</li><li>Is [starting current] * [run time in hours] = [Amp Hours] or should I be using something like [average current]? </li><li>Is there a good guide to the math or actual testing procedures?</li></ol><div>Here&#39;s a link to my <a href="https://docs.google.com/spreadsheets/d/1iMTTGLH9aOz2s1oqccSRw4_gO97dHxm4nJX7ln7vmDA/edit?usp=sharing">first test data.</a></div><div><br></div><div>Thanks for any insights.<br></div></div>