<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body dir="auto"><div dir="auto">A lot. The twist pitch time the length should be big enough to make it so fraction twist won't matter. You're canceling induction and you want the same ins as outs, so they'll cancel each other. If your run is 12 inches and you have 1 twist per inch, a missing twist would be 8% of total or 21.5 dB of reduction. With 3 per inch you'd have <3%, or about 30 dB. The is in theory. You'd like to have a bit higher pitch since it will give you better "local" rejection. Twisting and shielding are the hot setup, magnetic and electrostatic. A few per inch is the kind of number or you pick up Capacitance. Cat6 is 2 per cm or 5 per inch.</div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br></div><div id="composer_signature" dir="auto"><div style="font-size:12px;color:#575757" dir="auto">Sent from my Verizon, Samsung Galaxy smartphone</div></div><div dir="auto"><br></div><div><br></div><div align="left" dir="auto" style="font-size:100%;color:#000000"><div>-------- Original message --------</div><div>From: Mauricio Tavares via TriEmbed <triembed@triembed.org> </div><div>Date: 7/26/23 8:32 AM (GMT-05:00) </div><div>To: TriEmbed Discussion <triembed@triembed.org> </div><div>Subject: [TriEmbed] Wire twist rate </div><div><br></div></div>If I am pulling signal off a garden-variety variable reluctance<br>sensor, how much flexibility do I have with the wire twist ratio?<br><br>_______________________________________________<br>Triangle, NC Embedded Interest Group mailing list<br><br>To post message: TriEmbed@triembed.org<br>List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org<br>TriEmbed web site: https://TriEmbed.org<br>To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed@bitser.net?subject=unsubscribe<br>Searchable email archive available at https://www.mail-archive.com/triembed@triembed.org/<br><br></body></html>