<div dir="ltr">Anyone have a favorite circuit or chip to convert a PWM signal to a 0 to 5 VDC signal?  The resulting voltage needs to be very stable.  It feeds an ADC input.  I've looked at an RL circuit into an OpAmp that also has a cap to ground at the OpAmp input.  The DVM says it's stable but the ADC reading the voltage says it's not. I'm measuring 100 mV deviations.  Would like to get to a 10 mV deviation. I've tried changing cap values on the input as well as adding caps on the output side of the OpAmp.  Made improvements but still not good enough.  So looking for suggestions please.<div><br></div><div>Thanks,</div><div>Chuck</div></div>