<div dir="ltr"><div>Hello from the North!</div><div><br></div><div>I'm still working on the golf course robot.  Recently I've run into a rather odd issue.  When I put everything together for my 1/8 scale RC car platform, my GPS module refused to converge.  I spent a solid 4 days debugging it only to eventually discover that the problem appeared to be that my USB 3 camera was putting out large amounts of RF interference of a spectrum suitable to interfere with my GPS even when there was a metal ground plane between the GPS and the rest of the equipment.</div><div><br></div><div>Eventually, a combination of wrapping the camera in metal tape, placing the GPS with a ground plane elevated way above the rest of the robot and wrapping the camera's cable in aluminum foil finally got the GPS to converge.  The only problem is, the accuracy of the GPS is far worse than in the previous version of the robot.  Originally, I got within a 2-3 meters with an occasional drift.  Now it squiggles all over the place.</div><div><br></div><div>Does anyone know what I should try next to get decent performance and/or hunt down any interference for the GPS?</div><div><br></div><div>Thanks,</div><div>Charlie West<br></div></div>