<div dir="ltr">Some wicks are coated with resin flux, so they are messy. You would have to get bare copper wick and use liquid flux.<div>Still, I wouldn't suggest using wick to anyone without experience. Drop of liquid flux will do the trick.</div><div>8 or 6 mil traces can be easily damaged when desoldering with iron, especially when PCB is poor quality (plenty of them lately.)</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jan 22, 2019 at 3:33 PM Brian via TriEmbed <<a href="mailto:triembed@triembed.org">triembed@triembed.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">On 1/22/19 3:13 PM, Robert Gasiorowski via TriEmbed wrote:<br>
> I would have to disagree with few things in that article.<br>
 > [...]<br>
> I would never use wick to remove solder from SMD components, leaves <br>
> resin and you can easily overheat traces. Flux works wonders for <br>
> soldering and removal of excess of solder.<br>
<br>
Resin?  I'm not sure what resin you're referring to.  Wick is just a <br>
braid of copper; nothing else (well, some are pre-impregnated with flux, <br>
but in my experience that is never enough flux).  As far as overheating, <br>
I've never had a problem with that as long as there's plenty of flux and <br>
a well-tinned tip to ensure proper heat transfer.<br>
<br>
At any rate, flux and wick together is almost magic in its ability to <br>
act like a solder vacuum.  Hooray for capillary action!<br>
<br>
Afterwards, a quick wipe with an isopropyl-moistened q-tip is all you <br>
need to clean up the excess flux.<br>
<br>
-Brian<br>
<br>
_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<br>
To post message: <a href="mailto:TriEmbed@triembed.org" target="_blank">TriEmbed@triembed.org</a><br>
List info: <a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" rel="noreferrer" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" rel="noreferrer" target="_blank">http://TriEmbed.org</a><br>
To unsubscribe, click link and send a blank message: mailto:<a href="mailto:unsubscribe-TriEmbed@bitser.net" target="_blank">unsubscribe-TriEmbed@bitser.net</a>?subject=unsubscribe<br>
<br>
</blockquote></div>