<div dir="ltr"><div>Ken,</div><div><br></div><div>The 9331 boot loader doesn't do SD over SPI for boot strap.  You have however inspired low cost alternative.<br></div><div><br></div><div><div>- Lift _CS on the existing flash.<br></div></div><div>- Add socket jumping all signals except _CS</div><div>- Add switch for _CS lifting to vcc across 10K</div><div>- Switch to soldered flash</div><div>- Load U-Boot</div><div>- Copy flash to RAM</div><div>- Switch to socket flash</div><div>- Copy RAM to flash</div><div><br></div><div>Now the whole project is $6 for a pair of sockets.</div><div><br></div><div>Thanks for the inspiration!</div><div><br></div><div>Mike</div><div class="gmail_extra"><br></div></div>