<div dir="ltr">Chip,<div><br>If I follow, I believe you can achieve your goal by connecting the power terminal on your incoming FTDI connector directly to your Digital I/O pin and then connect this node to your PCB Vcc via a diode (or a Schottky diode for a slightly lower voltage drop). </div><div><br></div><div>This would power your board from the FTDI through the diode when connected, so your board is operating at one diode drop below the FTDI's Vcc. But the UART Friend would only see power when you drive the FTDI pin's Vcc pin high via the digital I/O pin. When powered via the I/O pin the extra diode will do nothing since the chip is powered from VCC, the I/O pin will be incapable of rising a diode drop above Vcc so the diode will never be forward biased. You would want to ensure you never try to drive the I/O pin low when FTDI cable is connected.</div><div><br></div><div>Shane</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Dec 2, 2015 at 8:01 AM, Chip McClelland via TriEmbed <span dir="ltr"><<a href="mailto:triembed@triembed.org" target="_blank">triembed@triembed.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">All, <div>Down to the final stretch on my new board - just need one more piece of advice. <span></span></div><div><br></div><div>I am trying to see if there is a way to accomplish something without resorting to a physical jumper. I would like to use the FTDI header on my new board in two ways with respect to the power pin. <br></div><div><div><br></div><div>1) when I connect a FTDI connector, it could power the board. The power pin is connected directly to the board's power rail. This is how it is today. </div><div><br></div><div>2) when I connect the Adafruit UART friend, I can turn it on and off using one of the Arduino's digital pins.  In this scenario, I only want the power pin connected to the digital pin on the Arduino. </div><div><br></div><div>Is there some way to automatically switch between these two modes based on whether there is power supplied by the FTDI adapter?</div><div><br></div><div>Thanks, </div><span class="HOEnZb"><font color="#888888"><div><br></div><div>Chip</div><div><br></div><div><br></div></font></span></div><span class="HOEnZb"><font color="#888888"><br><br>-- <br>Sent from my iPhone - please excuse the typos<br>
</font></span><br>_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<a href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a><br>
<a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" rel="noreferrer" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" rel="noreferrer" target="_blank">http://TriEmbed.org</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><br></div><div dir="ltr"><div style="color:rgb(0,0,0);font-family:HelveticaNeue-Light,'Helvetica Neue Light','Helvetica Neue',Helvetica,Arial,'Lucida Grande',sans-serif;font-size:16px">A blog about some of my projects.  <a href="http://fettricks.blogspot.com/" target="_blank">http://fettricks.blogspot.com/</a></div></div></div></div></div></div></div>
</div>