<div dir="ltr"><div><div><div><div><div><div><div>Hello,<br><br></div>Thanks again for all the good discussion on electrical connectors. <br><br>We're still debating some of the specifics for the CANInstall and/or I2CPotential protocols.  One of the big things up in the air is how reliable I2C is and how long the range can be.<br><br></div>My impression is that having a I2C bus of more than a meter or two is considered pushing your luck.  However, there seem to be range extender/repeater chips available that promise rather drastically improved range (such as the P82B715).  <br><br>If I may ask, what is the longest I2C bus you have built/seen?<br><br></div>How has your experience been in terms of reliability?<br><br></div>What sort of bus speeds do you tend to use?<br><br></div>The bus speed is driven by the master, so theoretically you could have a sub-hertz baud rate?  Does this mean that you could get a really long range with a super slow baud rate or are the edges not sharp enough to be detected?<br><br></div>Thanks,<br></div>Charlie<br></div>