<div dir="ltr"><div><div>I have a couple rolls of NiChrome wire I bought to do something very similar, cutting foam. Adam, you are welcome to a few feet of it to get yourself going.<br><br></div>Back in 1985'ish I made a letter opener in high school shop class by cutting out a piece of lexan/plexiglass, putting it in the oven and twisting it to shape. Sanding and polishing were the only post processing that we did. <br><br></div>Glen<br><div><div><div><br><div class="gmail_quote"><div dir="ltr">On Thu, Jul 9, 2015 at 9:52 AM Shane Trent via TriEmbed <<a href="mailto:triembed@triembed.org">triembed@triembed.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Adam,<div><br></div><div>Bending acrylic is not hard if you build or can get access to a heater. I thew together a bender something like the one on this page and had great results. The only part I did not have in my parts bin was the nichrome/rene wire. The annealing has to do with reducing post bending stress to prevent future crazing or cracking. I never annealed but only saw micro-cracks where I had mounted push-in RGB LEDs in laser cut holes and those cracks were not visible unless you picked it up and were looking for them. I think the cracks came from the plasticizer in the LEDs because I have never seen cracks anywhere else in cut or bent acrylic. I believe you can also bend ABS using the same setup.</div><div><br></div><div><br></div><div><a href="http://www.wa4dsy.com/robot/hot-wire-plastic-bender" target="_blank">http://www.wa4dsy.com/robot/hot-wire-plastic-bender</a><br></div><div><br></div><div>Nichrome wire had helpful tables for picking the desired temp and then helping you get the right gauge for your application so you can reach the target current for your wire length and power supply voltage.</div><div><a href="http://jacobs-online.biz/nichrome_wire.htm" target="_blank">http://jacobs-online.biz/nichrome_wire.htm</a><br></div><div><br></div><div>Better wire than Nichrome (last longer, stronger) but less design information. Design using Nichrome tools then translate to pick the best Rene for the design.</div><div><a href="http://jacobs-online.biz/rene_wire.htm" target="_blank">http://jacobs-online.biz/rene_wire.htm</a><br></div><div><br></div><div>Shane</div></div><div class="gmail_extra"></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Jul 9, 2015 at 8:43 AM, Adam Haile via TriEmbed <span dir="ltr"><<a href="mailto:triembed@triembed.org" target="_blank">triembed@triembed.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>I know I've talked to someone here about this before... does anyone have to tools and skill to custom bend acrylic? I know you generally just do it with some NiChrome wire, but I'm sure there's a bit of an art to it and I vaguely remember something about having to anneal it afterward? Either way, I'd rather find someone who knows what they are doing.</div><div><br></div>My wife would like some clear/white acrylic display stands to put on some existing shelves so she can have multiple display levels on the same main shelf. We've looked around and they to make things like what she wants, but they are all either exorbitantly expensive or not the right size. Basically, what she needs is something about 3" high, 4" deep, and 30" wide. Those aren't the exact dimensions, and the width could be split up if need be. Anyone here thing that would be doable?<br><br></div>
<br>_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<a href="mailto:TriEmbed@triembed.org" target="_blank">TriEmbed@triembed.org</a><br>
<a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" rel="noreferrer" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" rel="noreferrer" target="_blank">http://TriEmbed.org</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div></div><div class="gmail_extra">-- <br><div><div dir="ltr"><span style="color:rgb(0,0,0);font-family:HelveticaNeue-Light,'Helvetica Neue Light','Helvetica Neue',Helvetica,Arial,'Lucida Grande',sans-serif;font-size:16px">A blog about some of my projects.  <a href="http://fettricks.blogspot.com/" target="_blank">http://fettricks.blogspot.com/</a></span><br></div></div>
</div>
_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<a href="mailto:TriEmbed@triembed.org" target="_blank">TriEmbed@triembed.org</a><br>
<a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" rel="noreferrer" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" rel="noreferrer" target="_blank">http://TriEmbed.org</a><br>
</blockquote></div></div></div></div></div>