<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
I put the pull-down resistor and a handful of vias into the board as
Shane recommended. The vias are tricky, as you have to name them
with the same net name as the name of the copper flow polygons, but
then if you do a "rip up" they get optimized out. <br>
<br>
I'm going to order some of these today. If OSH Park has not slowed
down I should have them in hand a few days before the next meeting.<br>
<br>
<a
href="http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1-sch.pdf">schematic</a><br>
<a
href="http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1-brd.png">board</a><br>
<a
href="http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1.sch">Eagle
sch file</a><br>
<a
href="http://triembed.org/lib/PowerFetSOIC8-1/PowerFetSOIC8-1.brd">Eagle
brd file</a><br>
<br>
-Pete<br>
<br>
</body>
</html>