<div class="iw_mail" dir="LTR" style="font-family: Times New Roman,Times,Serif;font-size: 16px;">Shane,<br><br>I already have a 3.3 ohm resistor between the gate and IO pin. The larger 33K stopped it from working. Maybe I need to test this again.<br>I must see if I have a 100K or more for the G-S connection.<br><br><br>Thanks,<br>Brian<br><blockquote class="reply_block" dir="LTR" style="border-left: 2px solid blue; margin-left: 1em; padding-left: 1em; font-size: 13px; font-family: tahoma,helvetica,sans-serif;"><hr size="1">-----Original Message-----<br>From: "Shane Trent" <shanedtrent@gmail.com><br>Date: 06/18/15 01:51 PM<br>Subject: Re: Re[2]: [TriEmbed] Power FETs Vol 25, Issue 27<br><br><title></title>

<div dir="ltr">Brian,<div><br></div>
<div>1) I expect the length of wire to the gate would NOT be a limiting factor in your application. It might slow down the switching a little but it sounds like it would not be an issue. I would use a resistor (100 ohm or so) between the I/O pin and gate and add a large pull down resistor, 100k-1M ohm, between the gate and source to ensure capacitive coupling cannot start turning on the FET.</div></div><br></blockquote></div>