<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Mon, Mar 30, 2015 at 3:42 PM, Terry King <span dir="ltr"><<a href="mailto:terry@terryking.us" target="_blank">terry@terryking.us</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I think Arduinos are much more resistant to frying.  [...]<br>
<br>
So why  not just use Arduino for the physical I/O and link it to a Pi for the Computer/ Operating<br>
System / Network / Human Interface World part, and accept the fact that they are so different? And<br>
there are so many good software library / device choices out there.<br></blockquote><div><br></div><div>This is what the "<a href="http://www.makershed.com/products/alamode-for-raspberry-pi">Ala Mode</a>" and original "<a href="http://canada.newark.com/gertboard/gertduino/arduino-uno-compatible-i-o-board/dp/01X2969">Gertboard-Arduino</a>" offer.  Somebody mentioned at the Durham R-Pi meetup the other night that this is very redundant and costly alternative.<br></div><div> <br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
DISCLAIMER: About to mention stuff from my own shop...!! Watch out!<br>
<br>
AT $15 for a nice Arduino Derivative that already has 20 I/O pins, 20 ground pins, and 20 Vcc<br>
pins, plus nice 4-pin I2C and Serial connectors, and a 5V 2A switching supply built in, why not<br>
solve a bunch of things that are far from the Linux world.  [...]<br>
See:<a href="http://arduino-info.wikispaces.com/YourDuino-RoboRED" target="_blank">http://arduino-info.wikispaces.com/YourDuino-RoboRED</a><br>
<br></blockquote></div><br clear="all"></div><div class="gmail_extra">And I can attest that these are good, and at a better price point than the <a href="http://www.dfrobot.com/index.php?route=product/product&product_id=56">DFRobot RoMeo board</a> I first got -- <a href="http://www.dfrobot.com/index.php?route=product/product&path=35_104&product_id=844">version 2 is here</a> ($35).<br><br></div><div class="gmail_extra">If you want to stick with 32-bit, one of a number of alternatives is the <a href="http://www.dfrobot.com/index.php?route=product/product&product_id=1206">Dreamer Maple-A</a> board ($35), though it doesn't run Linux (Cortex-M3).  Similar to Cypress Semiconductor's <a href="http://www.cypress.com/psoc4/?source=CY-ENG-HEADER">PSoC-4</a> (Cortex-M0), which can be had for about $4.<br><br></div><div class="gmail_extra">All these are "hardened" against voltage spikes, higher currents, and higher voltages -- some cases up to 12V.<br></div><div class="gmail_extra"><br><br>-- <br><div class="gmail_signature">Scott G. Hall<br>Raleigh, NC, USA<br><a href="mailto:scottghall1@gmail.com" target="_blank">scottghall1@gmail.com</a></div>
</div></div>