<div dir="ltr">Just wanted to share that re-learned that the HAKKO FX-888 soldering iron tip is connected to the AC ground (which is the way you want an ESD safe iron to be wired). I was using a DigiSpark processor to add a feature to an electric mattress pad that uses a line-connected power supply.<div><br></div><div>I went to touch up the solder joint on one of the wire-wrap wires connecting the I/O pin to the board. I had just touched the tip of the iron to the joint when a brilliant flash of light reminded me that I had not removed the power from the system before heating the joint. </div><div><br></div><div>It looks and smells like I let the smoke out of an over-voltage protection diode on the ATtiny85. But it could have been or included the voltage regulator. The power LED does not come on when I plug the board into a USB port. I might have vaporized a trace too. <div><br></div><div>Learn on my dime!</div><div><br></div><div>Shane</div><div><br>-- <br><div class="gmail_signature"><div dir="ltr"><span style="color:rgb(0,0,0);font-family:HelveticaNeue-Light,'Helvetica Neue Light','Helvetica Neue',Helvetica,Arial,'Lucida Grande',sans-serif;font-size:16px">A blog about some of my projects.  <a href="http://fettricks.blogspot.com/" target="_blank">http://fettricks.blogspot.com/</a></span><br></div></div>
</div></div></div>