<div dir="ltr">Brian,<div><br></div><div>I recommend checking out the Pololu stepper driver boards. The are inexpensive (so mistakes are cheap) and can drive a decent sized stepper motor. There are several options depending on the voltage range you want to use and the current you need. The most basic stepper driver is $6 in singles (but the shipping will be a hit there, you might want to see if Jon has some on-hand at Anibit) and has be used as the stepper driver in many of the open-source 3D printer designs. </div><div><br></div><div>One neat thing to consider is that Pololu offers a stepper driver with on-board voltage regulator (both 5V and 3.3V on the same board), not sure if it can supply the current needed by a Pi but you may be able to run a Pi and the driver from the same raw motor drive power supply.</div><div><br></div><div><a href="https://www.pololu.com/category/120/stepper-motor-drivers">https://www.pololu.com/category/120/stepper-motor-drivers</a><br></div><div><br></div><div><a href="https://www.pololu.com/product/1182">https://www.pololu.com/product/1182</a><br></div><div><br></div><div><a href="https://www.pololu.com/product/1183">https://www.pololu.com/product/1183</a><br></div><div><br></div><div>I hope these are helpful. Is there another feature or other option that you would like to see in your "ideal" stepper driver?</div><div><br></div><div>Shane</div><div><br></div><div><br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Feb 10, 2015 at 1:09 PM, Grawburg <span dir="ltr"><<a href="mailto:grawburg@myglnc.com" target="_blank">grawburg@myglnc.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="LTR" style="font-family:Times New Roman,Times,Serif;font-size:16px">1. The small controller I use is  a ULN2003 board with a 28BYJ-48 motor.<br>2. The "new" motors are Haydon Series 3500, 0.57A<br>3. The board that is attached to the printer is a Xylotex XS-3525/8S-4. It is way more than I need -- or understand how to use.<br><br>Brian<br></div>



<br>_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<a href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a><br>
<a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" target="_blank">http://TriEmbed.org</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr"><span style="color:rgb(0,0,0);font-family:HelveticaNeue-Light,'Helvetica Neue Light','Helvetica Neue',Helvetica,Arial,'Lucida Grande',sans-serif;font-size:16px">A blog about some of my projects.  <a href="http://fettricks.blogspot.com/" target="_blank">http://fettricks.blogspot.com/</a></span><br></div></div>
</div>