<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    That was Chip McClelland. :-)<br>
    -Pete<br>
    <br>
    <div class="moz-cite-prefix">On 09/16/2014 04:59 PM, Michael
      Fulbright wrote:<br>
    </div>
    <blockquote cite="mid:5418A4BF.8050704@pobox.com" type="cite">
      <meta content="text/html; charset=ISO-8859-1"
        http-equiv="Content-Type">
      <div class="moz-cite-prefix">Pete,<br>
        <br>
          Thanks for putting up your comparison of power supplies.  I've
        been building some temperature sensors using the NRF24L01+
        module and came upon the Microchip MCP1700-3302E (3.3V LDO) for
        my purpose.  I don't really like using LiPos (except outdoors in
        RC planes where I won't burn down the house) and in my case I
        selected a 4 x AA Enerloop battery pack.  The MCP1700 has a very
        low quiescent current but I'm not sure about the efficiency
        compared to your best module.  The datasheet doesn't give any
        information. My current use case is probably different than
        yours as I only need ~30ma peak.  The MCP1700 is good up to
        250ma.  Also the MCP1700 comes in a TO-92 package which I liked
        since I'm not up to speed on making and soldering SMD PCBs
        (yet).<br>
        <br>
          I'll have to investigate the power supplies you tested some
        more to see if it makes sense to build newer temperature sensors
        with those.<br>
        <br>
        Michael Fulbright<br>
        <br>
        <br>
        On 9/16/2014 4:17 PM, Charles McClelland wrote:<br>
      </div>
      <blockquote
        cite="mid:EA2434BF-9229-45D9-94BF-46C57AEECA5C@mcclellands.org"
        type="cite">
        <meta http-equiv="Content-Type" content="text/html;
          charset=ISO-8859-1">
        Pete, 
        <div><br>
        </div>
        <div>Thanks for the response - was wondering if I was the only
          one who struggled with something as basic as finding an on-off
          switch.  </div>
        <div><br>
        </div>
        <div><a moz-do-not-send="true"
href="http://media.digikey.com/pdf/Data%20Sheets/Judco%20PDFs/50-0015-00.pdf">Here</a> is

          the data sheet for the push button on-off switch.  Thanks for
          the pointer on the cheaper Digikey alternative for my SPDT
          switch.  Guess I will be ordering more of them.</div>
        <div><br>
        </div>
        <div>Two other notes not related to this topic.  </div>
        <div><br>
        </div>
        <div><span class="Apple-tab-span" style="white-space:pre"> </span>1)

          I finished my testing of three potential 3.3V power supplies -
          Boost, Buck-Boost and Linear.  I <a moz-do-not-send="true"
            href="http://triembed.org/blog/?page_id=234">posted the
            results on the Triembed.org</a> blog but, it turned out that
          the TI Switching Buck-Boost power supply could extract about
          37% more power from four AA batteries than the linear supply.
           </div>
        <div><span class="Apple-tab-span" style="white-space:pre"> </span>2)

          If you are looking for a discount on Sparkfun products, there
          is a <a moz-do-not-send="true"
            href="https://www.sparkfun.com/news/1594">contest running
            this week</a> that can get you up to a 25% discount off your
          next order.  It involves taking some social media stuff but,
          hey I am not above sending a few tweets for a discount.</div>
        <div><br>
        </div>
        <div>Thanks,</div>
        <div><br>
        </div>
        <div>Chip</div>
        <div><br>
        </div>
        <div><br>
        </div>
        <div><br>
        </div>
        <div><br>
        </div>
        <div><br>
          <div>
            <div>On Sep 16, 2014, at 1:00 PM, <a moz-do-not-send="true"
                href="mailto:triembed-request@triembed.org">triembed-request@triembed.org</a>
              wrote:</div>
            <br class="Apple-interchange-newline">
            <blockquote type="cite">Send TriEmbed mailing list
              submissions to<br>
              <span class="Apple-tab-span" style="white-space:pre"> </span><a
                moz-do-not-send="true"
                href="mailto:triembed@triembed.org">triembed@triembed.org</a><br>
              <br>
              To subscribe or unsubscribe via the World Wide Web, visit<br>
              <span class="Apple-tab-span" style="white-space:pre"> </span><a
                moz-do-not-send="true" class="moz-txt-link-freetext"
                href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
              or, via email, send a message with subject or body 'help'
              to<br>
              <span class="Apple-tab-span" style="white-space:pre"> </span><a
                moz-do-not-send="true" class="moz-txt-link-abbreviated"
                href="mailto:triembed-request@triembed.org">triembed-request@triembed.org</a><br>
              <br>
              You can reach the person managing the list at<br>
              <span class="Apple-tab-span" style="white-space:pre"> </span><a
                moz-do-not-send="true" class="moz-txt-link-abbreviated"
                href="mailto:triembed-owner@triembed.org">triembed-owner@triembed.org</a><br>
              <br>
              When replying, please edit your Subject line so it is more
              specific<br>
              than "Re: Contents of TriEmbed digest..."<br>
              <br>
              <br>
              Today's Topics:<br>
              <br>
                1. Re: Switching Switches (Pete Soper)<br>
              <br>
              <br>
----------------------------------------------------------------------<br>
              <br>
              Message: 1<br>
              Date: Tue, 16 Sep 2014 11:35:40 -0400<br>
              From: Pete Soper <a moz-do-not-send="true"
                class="moz-txt-link-rfc2396E"
                href="mailto:pete@soper.us"><pete@soper.us></a><br>
              To: <a moz-do-not-send="true"
                class="moz-txt-link-abbreviated"
                href="mailto:triembed@triembed.org">triembed@triembed.org</a><br>
              Subject: Re: [TriEmbed] Switching Switches<br>
              Message-ID: <a moz-do-not-send="true"
                class="moz-txt-link-rfc2396E"
                href="mailto:541858CC.6010306@soper.us"><541858CC.6010306@soper.us></a><br>
              Content-Type: text/plain; charset="iso-8859-1";
              Format="flowed"<br>
              <br>
              I'm not an expert, but I've spent dozens of hours looking
              at switch <br>
              specs over the past few years and know your pain. I
              haven't found a <br>
              decent cheat sheet for the nomenclature Digikey and others
              use either <br>
              (e.g. "off-(on)"). I spent another few minutes searching
              and only <br>
              reminded myself that the Wikipedia page <br>
              <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
                href="http://en.wikipedia.org/wiki/Switch#Contact_terminology"><http://en.wikipedia.org/wiki/Switch#Contact_terminology></a>
              is still <br>
              worthless for this nomenclature. Can anybody reading this
              put us out of <br>
              our misery?<br>
              <br>
              But don't buy that E-Switch part from Sparkfun, buy it
              from Digikey as <br>
              EG1903-ND <br>
              <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
href="http://www.digikey.com/product-detail/en/EG1218/EG1903-ND/101726?WT.z_cid=ref_octopart_dkc_buynow&site=us"><http://www.digikey.com/product-detail/en/EG1218/EG1903-ND/101726?WT.z_cid=ref_octopart_dkc_buynow&site=us></a>
              <br>
              ($13.69 for 25). This is the same switch I've been using
              for a while. <br>
              There doesn't appear to be the obvious, potentially
              smaller SPST choice <br>
              (the E-Switch data sheet doesn't show one). But I agree
              100% with your <br>
              heart: there is a much smaller press-on, press-off switch
              out there some <br>
              place. And this little slide switch we're using is the
              pits as far as <br>
              stuff splashing on it.<br>
              <br>
              I haven't found any smaller switches except for tactile
              momentary ones, <br>
              which you wouldn't want unless you wanted to try Dave
              Jone's <br>
              soft-latching switch design <br>
              <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
href="http://www.eevblog.com/2012/03/30/eevblog-262-worlds-simplest-soft-latching-power-switch-circuit/"><http://www.eevblog.com/2012/03/30/eevblog-262-worlds-simplest-soft-latching-power-switch-circuit/></a>.
              <br>
              (Not recommending that as a good choice for you, just as
              an FYI and <br>
              maybe of interest to others).<br>
              <br>
              I'll try to remember to bring the collection of tactile
              switches I got <br>
              to try out for a project a while back. It might give folks
              at the next <br>
              meeting some idea of the mapping between "X grams
              pressure" and what <br>
              that really feels like, as well as sizes, etc.<br>
              <br>
              Finally, we need a generic link to that Digikey switch you
              mentioned: <br>
              the URL in your msg isn't valid.<br>
              <br>
              -Pete<br>
              <br>
              On 09/14/2014 03:59 PM, Charles McClelland wrote:<br>
              <blockquote type="cite">To any switch experts,<br>
                <br>
                I have been looking for a small switch to turn on and
                off my low-power <br>
                board (less than 100mA) and have not found anything
                great.  Part of <br>
                the issue is that the terminology of switches is
                confusing: on-off, <br>
                on-mom, off-(on), etc.  and some of it must be due to my
                last of skill <br>
                in doing parametric searches on Digikey and Mouser.  I
                just know the <br>
                switch I am looking for is out there but which of the
                tens of <br>
                thousands is it?<br>
                <br>
                I have been usingthis <a moz-do-not-send="true"
                  class="moz-txt-link-rfc2396E"
                  href="https://www.sparkfun.com/products/102"><https://www.sparkfun.com/products/102></a>
                Single <br>
                Pole Double Throw (SPDT) power switch from Sparkfun.  It
                works well <br>
                but it takes up space and I only need a Single Pole
                Single Throw <br>
                (SPST) variety.  Ideally, I could find a push-on,
                push-off switch <br>
                which - I believe - is written on-off in the switch
                function <br>
                terminology but I have yet to find a source in my Google
                searching <br>
                that would confirm this.<br>
                <br>
                I found this switch <br>
                <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
href="http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=157282720&uq=635463031929636734"><http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=157282720&uq=635463031929636734></a>
                after <br>
                a long search but I am still not sure it is the one I
                need as it only <br>
                says it is on-off (and not the more descriptive push-on,
                push-off) <br>
                anywhere on the documentation or website.  Also, I am
                not sure if <br>
                there is something else I am missing after Paul's
                presentation where <br>
                the switch had significant noise.  This should not be a
                big deal for a <br>
                power switch as I have a couple capacitors on both sides
                of the power <br>
                regulator - correct?<br>
                <br>
                I am sweating these decisions because I need to make a
                number of these <br>
                boards for a project with the City of Raleigh and I
                don't want to <br>
                screw it up.  If you have other suggestions within my
                component budget <br>
                of $1.50 a piece, please let me know.<br>
                <br>
                Thanks,<br>
                <br>
                Chip<br>
                <br>
                <br>
                <br>
                <br>
                <br>
                <br>
                _______________________________________________<br>
                Triangle, NC Embedded Computing mailing list<br>
                <a moz-do-not-send="true"
                  class="moz-txt-link-abbreviated"
                  href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a><br>
                <a moz-do-not-send="true" class="moz-txt-link-freetext"
href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
                TriEmbed web site: <a moz-do-not-send="true"
                  class="moz-txt-link-freetext"
                  href="http://TriEmbed.org">http://TriEmbed.org</a><br>
              </blockquote>
              <br>
              -------------- next part --------------<br>
              An HTML attachment was scrubbed...<br>
              URL:
              <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
href="http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20140916/842835ca/attachment-0001.html"><http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20140916/842835ca/attachment-0001.html></a><br>
              <br>
              ------------------------------<br>
              <br>
              Subject: Digest Footer<br>
              <br>
              _______________________________________________<br>
              TriEmbed mailing list<br>
              <a moz-do-not-send="true" class="moz-txt-link-abbreviated"
                href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a><br>
              <a moz-do-not-send="true" class="moz-txt-link-freetext"
                href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
              <br>
              <br>
              ------------------------------<br>
              <br>
              End of TriEmbed Digest, Vol 16, Issue 17<br>
              ****************************************<br>
            </blockquote>
          </div>
          <br>
        </div>
        <br>
        <fieldset class="mimeAttachmentHeader"></fieldset>
        <br>
        <pre wrap="">_______________________________________________
Triangle, NC Embedded Computing mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a>
TriEmbed web site: <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://TriEmbed.org">http://TriEmbed.org</a>
</pre>
      </blockquote>
      <br>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
Triangle, NC Embedded Computing mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a>
<a class="moz-txt-link-freetext" href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a>
TriEmbed web site: <a class="moz-txt-link-freetext" href="http://TriEmbed.org">http://TriEmbed.org</a>
</pre>
    </blockquote>
    <br>
  </body>
</html>