<div dir="ltr"><div><div><div><div><div><div>Very nice, but I am a little confused on the connection topology.  This device shows 2 ethernet jacks where the boards are connected in series (A -> B -> C -> D...) which would be very limiting when it comes to running boards around the house.  They also mention a 6 pin header and a 6 wire IDC option on board.<br>
<br>I looked for a schematic, but don't see one (if I missed it, please point it out as that would answer most of my next questions).<br><br></div>* I have used RS485 at work before and I remember simply stringing two pairs (with a ground jacket) for full duplex or one pair (with ground jacket) for half duplex.  These boards are listed as half duplex, so why are 6x wires needed?<br>
</div><br></div>* I see the 6 pin header, but not the 6 wire pushdown IDC mentioned in the comments - is that the black box on the right side near the two caps?<br><br></div>* The page mentions that the 6 wire header and IDC are simpler than the Ethernet cabling as does not require splicing and inserting mid cable, but is that really necessary?  Wouldn't it be possible to build a 'hub' that simply connects the boards together in s star like configuration if that is easier to wire for your home?  I know it would involve building something they don't sell, but seems like that would be easier than sneaking a cable in, and then out, of every location where a board is needed.<br>
<br></div>I personally love the idea and will probably contribute, but just trying to answer a few questions first.  The idea of having a single power location means I could easily provide a battery backup at that one location for all the sensor boards in case of a power outage.  I already have multiple CAT5s around my house that aren't currently being used, so being able to attach it to that and bring all the wires back to a single closet would make setup much easier.<br>
<br></div>So what am I missing (or misunderstanding)?<br><br><div class="gmail_extra"><br><br><div class="gmail_quote">On Fri, Aug 22, 2014 at 1:24 PM, Bill Farrow <span dir="ltr"><<a href="mailto:bill@arrowsreach.com" target="_blank">bill@arrowsreach.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Here is an interesting Arduino project that combines PoE and RS485<br>
onto an Arduino compatible board. This would be useful if you wanted<br>
to have a wired network of arduino boards for home automation for<br>
example.<br>
<br>
<a href="https://www.kickstarter.com/projects/1370454848/chainduino" target="_blank">https://www.kickstarter.com/projects/1370454848/chainduino</a><br>
<br>
Bill<br>
<br>
_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<a href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a><br>
<a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" target="_blank">http://TriEmbed.org</a><br>
</blockquote></div><br></div></div>