<div dir="ltr">Hey guys, <div><br></div><div>I was asking around at the last meeting about getting good RPM performance out of a salvaged hard drive motor. I had to do some shopping around for the lab, and I thought this might be of interest to anyone with old hard drive motors sitting around.</div>

<div><br></div><div> <a href="http://www.ti.com/lit/ds/symlink/drv11873.pdf" target="_blank">This IC </a>sounds almost too good to be true for me, but for about 2 bucks you get back EMF sensing speed control, lock sensing and a handful of other features. The best part is the low parts count required--just a few caps and resistors. It takes a PWM input and is pretty microcontroller friendly. I will probably just use a 555.</div>
<div><br></div><div>1.5 A cont isn't going to spin up anything huge, but TI has a family of higher power ones... I think (haven't had time to look around). <a href=" http://www.ti.com/product/DRV11873/compare"> http://www.ti.com/product/DRV11873/compare</a> << probably can find one here.</div>

<div><br></div><div>Depending on when I make our order, and how many I ruin during prototyping, I might have a few extra to hand out at the next meeting. </div><div><br></div><div>I read that HDD spindles are made to spin CCW only. Any truth to that?  </div>
<div><br></div><div>--Collin, the liquid metals guy</div></div>