<div dir="ltr">As those that saw my projects at the Maker Faire know, I work with a lot of high current LED projects. So I'm always looking for higher current supplies and my variable bench supply definitely doesn't cut it so I generally use supplies like the 5V/40A supply I used for my 24x24 matrix. But that is even a too little for some of the projects I have planned. I'm thinking about getting a 500 - 700W (@5V) supply (something like this: <a href="http://www.ebay.com/itm/370888481354">http://www.ebay.com/itm/370888481354</a>) and building it out with a few more features. <div>

<br></div><div>Mainly, I want to add built in current sensing that would be displayed on an LCD screen (likely all Arduino controlled). The supply itself would be unmodified - I'm not crazy. I would just add all that between the supply output and connectors on the outside of an enclosure I would build.</div>

<div><br></div><div>So, my main question is if anyone has any advice for how I could go about sensing this much current? I'm thinking about using something like the TI INA219 (<a href="http://www.ti.com/product/ina219">http://www.ti.com/product/ina219</a>) which, with the right shunt, should be able to handle it and would have a nice I2C interface. I'd also like to have 2 - 4 separate outputs, each with their own separate sensor... so each would need to handle up to 100A or so.</div>

<div><br></div><div>I realize that running the current through any PCB trace to the shunt would probably require insanely wide traces, so is there a good, high precision shunt that would work off PCB?</div><div><br></div>

<div>Basically, I don't know what I don't know, so I'd love any direction that could be given.</div></div>