<div dir="ltr">I have an Insteon-based system ( <a href="http://www.smarthome.com/_/INSTEON/_/23b/land.aspx">http://www.smarthome.com/_/INSTEON/_/23b/land.aspx</a> ).  The controllers are a bit pricier than something like X10, but the reliability is high.  I have one of their older PowerLinc controllers that has a built-in web interface, so I run all my time-based events simply by using cron and curl on a Raspberry Pi.  The system runs the pump on our garden pond, a few lights around the house, the ceiling fan in our bedroom (it cuts off just before our alarm goes off -- always enough to wake me without jarring me out of bed) as well our our HVAC system.  Back when I started I was stuffing hex codes to the system over a serial connection...  things have definitely gotten much easier.<div>
<br></div><div>If I was getting started with Insteon now, I'd get the <a href="http://www.smarthome.com/2242-222/INSTEON-Hub/p.aspx?green=2B042E67-18C5-5B91-0448-4CB93BD461D9&utm_campaign=site_recs&utm_medium=site_recs&mbpage=prod">Insteon Hub</a> for $129.  After that it's just a matter of adding Insteon controllers.  The outlets and dimmer switches are about $50-$60 each.  Just swap out an existing switch or outlet and link it to the Hub, and you're good to go.</div>
<div><br></div><div>Downsides:  pricier than some solutions.  Upsides:  Really easy, high reliability in communications, lots of devices for multiple purposes.</div><div><br></div><div>Kevin</div></div><div class="gmail_extra">
<br><br><div class="gmail_quote">On Sun, Oct 13, 2013 at 11:36 PM, Charles West <span dir="ltr"><<a href="mailto:crwest@ncsu.edu" target="_blank">crwest@ncsu.edu</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr"><div><div><div>Hello,<br><br></div>I'm thinking of doing a Linux command line/home automation project for my Spoken Dialogs System class.  I think I am going to base the system off of ROS and try to link with a existing home automation system for low level control of house stuff using X10 and others.  Preliminary research has dredged up the following links (which might be of interest).<br>

<br>An interesting and well supported home automation solution written in perl<br>Mister House<br><a href="http://misterhouse.wikispaces.com/" target="_blank">http://misterhouse.wikispaces.com/</a><br><br>A (large) Linux home automation link list<br>

<a href="http://home.comcast.net/~ncherry/" target="_blank">http://home.comcast.net/~ncherry/</a><br><br>Power plug control via TTL<br><a href="http://www.powerswitchtail.com/Pages/default.aspx" target="_blank">http://www.powerswitchtail.com/Pages/default.aspx</a><br>

<br>Another power plug control option<br><a href="http://www.phidgets.com/products.php?category=9&product_id=1014_2" target="_blank">http://www.phidgets.com/products.php?category=9&product_id=1014_2</a><br><br>A complete graphical open source home automation solution<br>

<a href="http://www.linuxmce.org/" target="_blank">http://www.linuxmce.org/</a><br><br></div>If I may ask, has anyone worked with these  (particularly Mister House)? <br><br></div>Thanks,<br>Charlie West<br></div>
<br>_______________________________________________<br>
Triangle, NC Embedded Computing mailing list<br>
<a href="mailto:TriEmbed@triembed.org">TriEmbed@triembed.org</a><br>
<a href="http://mail.triembed.org/mailman/listinfo/triembed_triembed.org" target="_blank">http://mail.triembed.org/mailman/listinfo/triembed_triembed.org</a><br>
TriEmbed web site: <a href="http://TriEmbed.org" target="_blank">http://TriEmbed.org</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><i><font color="#660000">Life is short:  Void the warranty.</font></i>
</div>