<div dir="ltr">I have a project where I am running 4 servos and calling to (simple) falling interrupts on Pins 2 & 3.<div><br></div><div>I have switched to a Mega because when I added Increased the number of servos from 2 to 4, the project only recognizes 2 when the interrupts are active.</div>
<div><br></div><div>Should I switch to other pins on the Mega board? I lost my Arduino Cookbook, so if someone has a good example I would appreciate it.</div><div><br></div><div>Oh by the way my project is for the Festival in Motion Sat 9/28, For those who know me it is for the Champ/Chump bike race machine that was at Maker Fair.</div>
<div><br></div><div>Some history, Originally 2 servos were Large Speedometers, and they were very accurate and worked great.</div><div>I added a race position track with 2 more servos, the Speedometers do not function until the race is over and the Interrupts are not working.</div>
<div><br></div><div>Thanks again....</div><div><br></div><div>If you want a fun free festival bring the whole family to Festival in Motion <a href="http://www.Fesitvalinmotion.com">www.Fesitvalinmotion.com</a> 10 till 2pm.</div>
<div><br></div><div>R,</div><div>Alan Wiggs</div></div>