[TriEmbed] Lowest learning curve to design a board?

[Dawn Trembath]

Ditto what Rob said.

On Wed, Dec 27, 2023 at 4:54 PM Robert Mackie via TriEmbed <
triembed at triembed.org> wrote:

> I strongly support what Paul said in recommending Fritzing. I was
> completely snowed under by everything else I tried the first couple of
> times. Once I had designed a couple of boards and obtained them using
> Fritzing, i went back to kicad and was able to make sense of it. I use
> kicad now, but I never would have gotten there without Fritzing.
>
> Rob.
>
> On Wed, Dec 27, 2023 at 4:45 PM The MacDougals via TriEmbed <
> triembed at triembed.org> wrote:
>
>> I started with Eagle.  Quickly got frustrated and tried Fritzing, which
>> did the job for the board I needed.  On seeing that OSHPark accepts Eagle
>> board files, I went back to Eagle.
>>
>> They now accept Eagle, KiCad, or gerbers.  I watched some YouTube
>> tutorials on Eagle and that helped immensely.
>>
>>
>>
>> I am still using a free version of Eagle, but it seems that they are
>> wanting people to pay for even the basics.
>>
>>
>>
>> If you have not learned a CAD program yet, I would recommend KiCad (I
>> have never used it) because it is open source and supported.
>>
>>
>>
>> If you want help with Eagle, I would be happy to work with you.
>>
>>
>>
>> ---> Paul
>>
>>
>>
>>
>>
>>
>>
>> *From:* TriEmbed <triembed-bounces at triembed.org> *On Behalf Of *jonathan
>> hunsberger via TriEmbed
>> *Sent:* Wednesday, December 27, 2023 3:52 PM
>> *To:* Triangle Embedded Devices <TriEmbed at triembed.org>
>> *Subject:* Re: [TriEmbed] Lowest learning curve to design a board?
>>
>>
>>
>> (trying to make this fit in the triembed 250k limit..)
>>
>> On Wed, Dec 27, 2023 at 3:45 PM jonathan hunsberger <1101010 at gmail.com>
>> wrote:
>>
>> Thanks for all the info. I'm playing around with EasyEDA at the moment
>> and will see where i can get.  I did hack this together with pre-perforated
>> circuit board in a lock-n-lock (see pic).  Now i'd like to make it more
>> compact and repeatable and maybe make a 3d-printed shell for it.  This is
>> for a project <https://github.com/jrhunger/dialamemory> where you can
>> dial numbers on a rotary phone and play audio samples.  There is one in the
>> Cocoa Cinnamon on Hillsborough Rd in Durham, but for that one i took the
>> insides out and wired everything directly to the receiver/dial.  The newer
>> version (pictured and which i'm trying to make a board for) uses a SLIC
>> board so an unmodified phone can plug into it.  I'm sure i will get it
>> wrong a few times before i get it right. :)
>>
>>
>>
>> _______________________________________________
>> Triangle, NC Embedded Interest Group mailing list
>>
>> To post message: TriEmbed at triembed.org
>> List info:
>> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
>> TriEmbed web site: https://TriEmbed.org
>> To unsubscribe, click link and send a blank message: mailto:
>> unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
>> Searchable email archive available at
>> https://www.mail-archive.com/triembed@triembed.org/
>>
>> _______________________________________________
> Triangle, NC Embedded Interest Group mailing list
>
> To post message: TriEmbed at triembed.org
> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: https://TriEmbed.org
> To unsubscribe, click link and send a blank message: mailto:
> unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
> Searchable email archive available at
> https://www.mail-archive.com/triembed@triembed.org/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20231227/53167041/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 115482 bytes
Desc: not available
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20231227/53167041/attachment.jpg>