[TriEmbed] RF power

[MARIO DE ARANZETA]

1. If you are measuring RF power at the SMA connector this is called conducted power not radiated. Antenna gain or loss factored in makes it radiated.
2. A spectrum analyzer in peak hold is very capable of measuring the output power. For BT use a 1 or 3 MHz Resolution BW and an appropriate sweep speed.
3. Make sure to use an external attenuator on the SA. I suggest 30dB to keep the RF power into the SA from overloading or damaging it.
Best Regards,Mario, N4TSV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20220323/bc3d4e20/attachment.htm>