[TriEmbed] Article: Elektor Magazine: Infineon for Makers Means Arduino Shields 4U

John Vaughters jvaughters04 at yahoo.com
Tue Oct 22 15:37:52 CDT 2019


 ifx007t - I like this chip that I found on one of the motor driving board.

    On Friday, October 18, 2019, 12:49:10 PM EDT, Scott Hall via TriEmbed <triembed at triembed.org> wrote:  
 
 ... But I guess they practice distributed risks, distributed costs.

On Fri, Oct 18, 2019 at 12:47 PM Scott Hall <scottghall1 at gmail.com> wrote:

Elektor Store is a German company, Elektor Magazine is Finnish.However, I tend to get a lot of their for sale stuff from Elektor America out of Connecticut -- the old Circuit Cellar facilities.

On Fri, Oct 18, 2019 at 12:38 PM Pete Soper <pete at soper.us> wrote:

  In the shipping part of their web site they say "most stuff comes out of their main warehouse in Netherlands", so I guess if you've had alternating shipment sources that would create the inconsistency. The warehouse location was in turn surprising, 'cause I was under the impression this is a UK company. Maybe getting a head start on prep for Brexit. :-)
 -Pete
 
 On 10/18/19 12:20 PM, Scott Hall wrote:
  
 I have no idea what their lead time is.  However, my last order was fulfilled from their NYC warehouse and took less than a week -- but it has been inconsistent.
  
  On Fri, Oct 18, 2019 at 12:04 PM Pete Soper via TriEmbed <triembed at triembed.org> wrote:
  
  Holy guacamole, the Euro is under 90 cents. I guess I've been under a rock (only pay attention to the UK pound). The last time I noticed the Euro this low was in Germany about 15 years ago. So the Infineon temp sensor board is roughly $8.90, about two dollars less than what Digikey wants for the chip on that board. Shipping is with a "standard rate" of around $4.45. What's the lead time of their standard shipping, Scott?
 
 -Pete
 
 On 10/18/19 11:27 AM, Scott Hall via TriEmbed wrote:
  
  Infineon for Makers Means Arduino Shields 4U Infineon for Makers means Arduino-compatible shields and shields2go to evaluate BLDC motor drivers, LED drivers, XMC microcontrollers MCUs, and much more. 
  https://www.elektormagazine.com/news/infineon-for-makers?utm_source=Elektor+International+%28English%29 
 -- 
 Scott G. Hall
 Raleigh, NC, USA
 scottghall1 at gmail.com  
  _______________________________________________
Triangle, NC Embedded Computing mailing list

To post message: TriEmbed at triembed.org
List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
TriEmbed web site: http://TriEmbed.org
To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe

 
 
  _______________________________________________
 Triangle, NC Embedded Computing mailing list
 
 To post message: TriEmbed at triembed.org
 List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
 TriEmbed web site: http://TriEmbed.org
 To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe
 
 
  
 
 -- 
 Scott G. Hall
 Raleigh, NC, USA
 scottghall1 at gmail.com 
 
 


-- 
Scott G. Hall
Raleigh, NC, USA
scottghall1 at gmail.com


-- 
Scott G. Hall
Raleigh, NC, USA
scottghall1 at gmail.com_______________________________________________
Triangle, NC Embedded Computing mailing list

To post message: TriEmbed at triembed.org
List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
TriEmbed web site: http://TriEmbed.org
To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20191022/e0c7fbc2/attachment.html>


More information about the TriEmbed mailing list