[TriEmbed] PCB Design Software Question

[John Vaughters]

 +1 on KiCAD because if I am going to spend time on something I do not want restrictions.
I am not a PCB designer, we always had people that specialized in the that skill, but I was very familiar to the PCB manufacture and assembly. So when I give you my experience on KiCAD, I am not biased, but understand I was deeply aware of the process.
For me, I installed KiCAD to create schematics, then one day decided to turn a simple circuit I built on a proto board into a full GERBER file set just to see how hard it was. No Joke, it was only a few hours, but it was a very simple circuit, however, that is not the point, I had GERBER files and quickly. Meaning, the process to convert my schematic to a GERBER set was intuitive and reasonably simple. PCB design is not simple, so don't misunderstand. But the process to me was simple in terms of learning how to do it in KiCAD. 
Again, I knew what I needed and I understand that many don't. So add that to the learning process, but the general PCB knowledge is needed no matter what software you use.
"Luke, Use the Netlist"
Good Luck in whatever you decide to use. PCB design can be grueling.
John Vaughters


    On Tuesday, March 26, 2019, 10:20:33 AM EDT, Brian via TriEmbed <triembed at triembed.org> wrote:  
 
 On 3/25/19 11:08 PM, Dwight Morgan via TriEmbed wrote:
> Thanks Carl. I downloaded Eagle and will bear down on learning it. I’ve 
> used AutoCad before so I’m hoping there is a wee bit of familiarity. 
> There should be some good tutorials for it.
> 
> Dwight

Hi Dwight,

I strongly encourage you to pick KiCad over Eagle, if you're going to 
invest the time to learn the software.  KiCad is certainly different 
from Eagle (I don't know whether I'd say "harder"), but its real claim
to fame as far as I'm concerned is that it's free software.  Eagle's 
"free" version limits you to two layers and (when last I cared about it) 
100x160 mm routing area (i.e. board size).

Of course, the main drawback to KiCad is lack of manufacturer support in 
terms of symbol and footprint libraries.

I'm also a contributing developer to KiCad, so add a grain or two of 
salt to my comments.

Another option is PCB Artist, found at
https://www.4pcb.com/free-pcb-layout-software/

I've never used it, but it claims to be free and unrestricted, and have 
a half-million-part library.

Cheers,
-Brian

_______________________________________________
Triangle, NC Embedded Computing mailing list

To post message: TriEmbed at triembed.org
List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
TriEmbed web site: http://TriEmbed.org
To unsubscribe, click link and send a blank message: mailto:unsubscribe-TriEmbed at bitser.net?subject=unsubscribe

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20190326/1738259a/attachment.htm>