[TriEmbed] Logic Analyzer Recommendatio

Sun Jan 18 10:54:44 CST 2015

To all,  thanks for the responses thus far. I have one other question
before I pull the trigger on this.  Does the Saleae doe enough extra to
justify the extra price over the Bus Pirate?   My main focus today is
listening to the I2C bus but am open to getting a more capable tool if it
may be helpful in the future.

Thanks,
Chip

On Saturday, January 17, 2015, <triembed-request at triembed.org> wrote:

> Send TriEmbed mailing list submissions to
>         triembed at triembed.org <javascript:;>
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> or, via email, send a message with subject or body 'help' to
>         triembed-request at triembed.org <javascript:;>
>
> You can reach the person managing the list at
>         triembed-owner at triembed.org <javascript:;>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TriEmbed digest..."
>
>
> Today's Topics:
>
>    1. Re: Logic analyzer recommendation (Jon Wolfe)
>    2. Why Did This Stop Working? (Grawburg)
>    3. Re: Why Did This Stop Working? (Shane Trent)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 17 Jan 2015 14:48:32 -0500
> From: Jon Wolfe <jonjwolfe at anibit.com <javascript:;>>
> To: Chip McClelland <chip at mcclellands.org <javascript:;>>, "
> triembed at triembed.org <javascript:;>"
>         <triembed at triembed.org <javascript:;>>
> Subject: Re: [TriEmbed] Logic analyzer recommendation
> Message-ID: <6d7mvm2pv0sfnbymgj40tcwp.1421524112170 at email.android.com
> <javascript:;>>
> Content-Type: text/plain; charset="utf-8"
>
> I highly recommend the Sallae. I have a clone, ?that I actually received
> by accident, sort of. It has saved me many times. I will purchase an
> original one when I can afford it.
>
> <div>-------- Original message --------</div><div>From: Chip McClelland <
> chip at mcclellands.org <javascript:;>> </div><div>Date:01/17/2015  11:40
> AM  (GMT-05:00) </div><div>To: triembed at triembed.org <javascript:;>
> </div><div>Subject: [TriEmbed] Logic analyzer recommendation </div><div>
> </div>To all,
>
> I am trying to troubleshoot an issue with multiple devices on an i2c bus.
> Do any of you have a recommendation for an inexpensive logic analyzer that
> I could use to troubleshoot?? Ideally it would be able to look at SPI and
> simple digital and analog lines. Mac compatibility is a must. Any
> recommendations?
>
> Adafruit has a Sallae 4-channel analyzer that is my current front runner
> but don't want to spend $100 and find out it is not the best choice. ?
> https://www.adafruit.com/products/2312
> Thanks,
>
> Chip
>
>
>
> --
> Sent from my iPhone - please excuse the typos
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150117/42796a44/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Sat, 17 Jan 2015 15:21:15 -0500
> From: Grawburg <grawburg at myglnc.com <javascript:;>>
> To: Triangle Embedded Devices <TriEmbed at triembed.org <javascript:;>>
> Subject: [TriEmbed] Why Did This Stop Working?
> Message-ID: <8beae92832cea269a16b8bc3c1481ef2 at myglnc.com <javascript:;>>
> Content-Type: text/plain; charset="utf-8"
>
> My train/conveyor project developed a glitch when I redid the protoboard I
> was using.? The key to the project was an pair of IR LED emitter/detectors
> (Sparkfun SEN-00241) that until the rework operated just fine when 4.5
> inches apart. Both units were inside of 1/2" tubes so that room lighting
> did not affect them. ? Circuit is attached. (I'm using 3.3 VDC)
>
> Now, here's the one change -- and it's actually due to an original
> mistake.? The schematic shows a 10k resistor going to the collector of the
> detector. That's what I thought I had used on the original board (the one
> that worked) but discovered I actually had a 100k. My new board does have
> the 10k and what is happening is that instead being able to have the
> emitter/detector work at 4.5" they only work at about 2". Meaning that
> voltage goes to Vout which is a pin on my MCP23008 port expander when the
> devices are much beyond 2 inches apart.
>
>
> Thanks,
> Brian Grawburg
>
>
>
>
>
>
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Conveyor_Railroad_LED.PNG
> Type: image/png
> Size: 8230 bytes
> Desc: not available
> URL: <
> http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150117/6237b40d/attachment-0001.png
> >
>
> ------------------------------
>
> Message: 3
> Date: Sat, 17 Jan 2015 15:05:00 -0800 (PST)
> From: "Shane Trent" <shanedtrent at gmail.com <javascript:;>>
> To: "Grawburg" <grawburg at myglnc.com <javascript:;>>
> Cc: Triangle Embedded Devices <triembed at triembed.org <javascript:;>>
> Subject: Re: [TriEmbed] Why Did This Stop Working?
> Message-ID: <1421535900007.e33dcb59 at Nodemailer>
> Content-Type: text/plain; charset="utf-8"
>
> Brian,
>
>
> Just change back to the 100k. The larger resistor provides a weaker
> pull-up and makes it easier for your IR signal to turn on the
> photo-transistor and pull down the output signal. The higher value of the
> 100k will make your sensor more sensitive to external light sources. But it
> sounds like your light shield on the ?detector is keeping out any extra
> light. Just be careful in the future if you start getting false triggers
> due to new light sources or moving the track to a new location.?
>
>
>
>
> Another option would be using a smaller value resistor on your LED but you
> must stay under the LED current limit. I recommend the 100k pull- up since
> you already know it works.?
>
>
>
>
> Shane
>
>
>
>
>
>
>
>
> ?
> Sent from Mailbox
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150117/b0977871/attachment.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> TriEmbed mailing list
> TriEmbed at triembed.org <javascript:;>
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
>
>
> ------------------------------
>
> End of TriEmbed Digest, Vol 20, Issue 18
> ****************************************
>

-- 
Sent from my iPhone - please excuse the typos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150118/1b978390/attachment.htm>