[TriEmbed] Circuit Help

[Pete Soper]

Just string together a few plain relays.
-Pete

On 12/04/2015 12:51 PM, Grawburg via TriEmbed wrote:
> I have a quarter-turn ball valve with a 12V actuator [HSH-Flo 1/2" DN15 12VDC CR-05 FNPT SS304 Position Feedback Motorized Electric Ball Valve.]  I'm using opto-isolated relay activated by a Raspberry Pi but can only control one direction because the valve reverses direction by flipping the leads. If I was doing it mechanically I would have a double pole triple throw rotary switch. I cannot find a suitable opto-isolated relay that is 2P3T...at least one that doesn't cost a fortune. Any suggestions to help me think this through would be welcomed.
>
>
> Thanks,
> Brian Grawburg
>
>
>
>
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
> TriEmbed at triembed.org
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org