[TriEmbed] TriEmbed monthly meeting tomorrow night 7pm

[Michael Wayne]

Hello All,

Thanks a lot for letting me get up and speak with you about my Chariot
project! Below is the feature set of Chariot. That should provide a much
better explanation about the project than my presentation :-)

@Tom - You asked which IPv6 stack we're running - it's compliant with the
IP Smart Objects protocol stack. Cisco contributed the 6LoWPAN stack to the
open source Contiki OS <http://contiki-os.org/> which is what runs on
Chariot.

Application-CoAP
Transport - UDP
Network - 6LoWPAN
Link -802.15.4

*Chariots include the following features:*


*IPv6-ready stack:*

*·         6LoWPAN/IPv6 protocol/*

*·         UDP+ICMPv6*

*·         IPv6 multicast support with mDNS*

*·         CoAP client/server/cross-proxy with observe capability*

*·         Socket interface for application development*

*·         OTA (Over-The-Air update capability)*

*Hardware Features:*

*·         Nanoamp-level sleep mode*

*·         Industrial temperature operation (-40C to +125C)*

*·         AES-128 hardware accelerator and true random number generation
for secure wireless transmission*

*·         High-accuracy temperature sensor*

*·         6-axis accelerometer*
*·         Radio transceiver provides data rates from 250 kb/s up to 2
Mb/s, frame handling, outstanding receiver sensitivity and high transmit
output power enabling a very robust wireless communication.*



On Sun, Apr 12, 2015 at 10:24 AM, Pete Soper <pete at soper.us> wrote:

>  Details with maps here <http://triembed.org/blog/?page_id=292>.
>
> Planned:
>   * Announcements, have a job/need a job, recognize new attendees
>   * A few words about what went on at RARSFest
>   * Michael Wayne is working on a Kickstarter for his gadget shown at
> http://www.qualianetworks.com/
>   * Short demos of at least some of this:
>      * Browser-based Mbed IDE programming of a $10.30 Arduino-compatible
> ARM M4F board (ST NucleoF401RE)
>      * Safe AC mains current sensing
>      * Custom Freescale FXCQ8700OS mag/accel breakout (new version)
>      * Custom ST LSM300DLC accel/gyro breakout (to explore simple inertial
> guidance)
>      * Display of Controleo2 reflow oven controller w convection oven
> (guts probably hanging across the table, please excuse the newly-sauteed
> adhesive aroma)
>   * Usual general open discussion followed by breakup for face to face
> chats
>
> -Pete
>
> _______________________________________________
> Triangle, NC Embedded Computing mailing list
> TriEmbed at triembed.org
> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org
> TriEmbed web site: http://TriEmbed.org
>
>


-- 
_________________________________________________
*Michael Wayne*
*(805) 637-2083 <michael.wayne at georgewaynellc.com>*
Connect with us on:
<https://twitter.com/#!/MWofGWL>
<http://www.linkedin.com/in/michaelwaynenc>

CONFIDENTIAL & PRIVILEGED: Both this e-mail and any attachments included
with this transmission are intended solely for the use and handling of the
individual or entity named above. They may contain information that is
privileged, confidential, and exempt from disclosure under applicable law.
If the reader of this message is not the intended recipient, or the
employee or agent responsible for delivering this message to the intended
recipient, any dissemination, distribution, or copying of this
communication is strictly prohibited. If you have received this
communication in error, please notify us immediately by telephone or e-mail
and return the original message to us at the above e-mail address or via
U.S. Mail, and delete and destroy any other copies of the message and
attachments. Thank You.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.triembed.org/pipermail/triembed_triembed.org/attachments/20150414/a27f4067/attachment.htm>